Clean With A Piece Of Tack Cloth.

We also decided to ditch the storm doors as they were in pretty poor shape. 25.turn the door over and scrub the other side. 2.using a paint brush or a roller, apply a coat of primer to the entirety of the stained wood piece.

Apply A Second Coat As The Manufacturer Instructs.

Using the deglosser, apply with a paint brush over the surface of the wood.you can see how it dulled the stained wood in the image below. Allow the primer coat to dry completely. Light scuff and wipe down the area, again

Work In A Well Ventilated Area.

Brushing on primer sealer over existing stained and varnished surface once the top side of your item has been primed and sealed and has dried, flip it over and repeat for the other side. First, you would need to sand down the surface area really well with medium grit sandpaper. Sand and clean the area again.

You Can Also Use A Paint Brush For Any Areas That Are Hard To Reach With A Roller.

10.hi i have 15 internal doors and related architrave and skirting that are all currently stained in a mahogany, doors are 6 panel pine though i think. It helps to protect the wood surfaces more effectively. Prime paint over your stained wood with a paint primer first.

2.We Lightly Sanded With A Fine Grit And Applied Two Coats Of Zinsser 123 Latex Primer.

Apply one coat of glidden exterior flat paint color matched to behr. This was a glossy varnished buffet and you can see how dull it is after the deglosser. Apply it with a paint roller for even coverage.